Emerging Technology Market Intelligence Blog

Next Generation Lithography: A Lesser-Known Technology Behind the Evolution Semiconductor Chips

Written by BIS Research | Jan 10, 2023 12:07:00 PM

The advanced electronic materials and related technologies has a big impact on the increasing comfort of modern society is. Today, all the electronic tools that are essential for comfortable lifestyle including mobile phones, computers, laptops, sensors, and many more have one essential component in common, that is, semiconductor chip. 

As these smart gadgets evolved over time, more and more advanced features were added to their services to make these devices more efficient and comfortable. Reduced semiconductor chip sizes and high throughputs make it possible for consumers to expect to pay less for smaller, faster, and more energy-efficient electronic gadgets that perform computational functions. One of the fundamental criteria for this advancement is semiconductor material patterning, which is accomplished by the lithography technology. 



Over time, the lithography technique has evolved into next generation lithography (NGL) technologies such as optical lithography, extreme ultraviolet (EUV) lithography, electron beam lithography (EBL), X-ray lithography, and ion beam lithography. In the article, a few of these advanced lithography techniques are discussed in detail, along with its impact on the evolution of semiconductor chips. But first, let’s understand what lithography technology is. 

What is lithography? 

Lithography is a key technology in the production of commercially viable microelectromechanical system (MEMS) devices in addition to being the driving force behind the semiconductor and IC industries. In the creation of nanoscience and engineering applications, and it is also utilised for prototype fabrication.

Several physical and chemical procedures must be carried out on a semiconductor substrate such as silicon to fabricate an integrated circuit (IC). The several steps involved in creating an IC can generally be divided into three groups: semiconductor doping, patterning, and film deposition. Transistors and their parts are connected and isolated using films that are both insulators (such as different types of silicon dioxide, silicon nitride, and others) and conductors (such as polysilicon, aluminium, and more recently copper). With the application of voltage, the conductivity of silicon can be altered due to selective doping of specific silicon areas.

Millions of transistors can be assembled and connected to construct the intricate circuitry of a contemporary MEMS device by building structures out of these diverse components. The creation of three-dimensional relief pictures on the substrate for later pattern transfer is known as lithography, and it is fundamental to all these techniques.

Next-Generation Lithography Techniques

1.    X-Ray lithography: This lithography procedure uses a subset of nanolithography techniques, allowing for the patterning of transistors with more minute features. It transfers a geometric design from a mask to a substrate's light-sensitive chemical photoresist, or just "resist," using X-rays. The resulting design is then engraved into the substance beneath the photoresist through a succession of chemical processes.

The optical resolution of X-ray lithography can be increased to 15 nm by employing 1 nm illumination at short wavelengths. The proximity printing strategy is used to put this into practise. The method has advanced to the point where batch processing is possible.

The method's extension uses Fresnel diffraction of Near Field X-rays; a clear mask feature is "demagnified" by proximity to a wafer that is placed close to a "Critical Condition." This condition, which depends on both the wavelength and the size of the transparent mask feature, establishes the mask-to-wafer Gap.

Because no glasses are needed, the procedure is easy to process. The semiconductor industry originally considered this method as a potential contender for next-generation lithography, and it was successful in producing batches of microprocessors. Smaller feature sizes are possible thanks to X-rays' short wavelengths (below 1 nm), which get around optical lithography's diffraction restrictions. The refractive lenses are replaced with elementary collimating mirrors or diffractive lenses if the X-ray source is not collimated, as is the case with synchrotron radiation.

Advantages of X-ray lithography

•    This technique can resolve diffraction issues
•    Shorter wavelengths (0.1 - 10 nm) 
•    Smaller and more detailed features can be patterned

2.    Electron Beam Lithography (EBL): In this method, a narrowly focused electron beam is scanned across a substrate's surface. In order to transfer the nanostructure into the substrate or later construct a device in a layer-by-layer fashion, electron beam lithography with ultra-high resolution (UHR) is typically employed at the very beginning of a multiple technique and multiple step process in a top-down approach.

EBL advantages

•    Can write smaller features than X-ray lithography and photolithography; resolution is not constrained by diffraction. 
•    minimum feature is written on the nanoscale.
•    The wafer is directly written with the pattern.
•    employed to create prototypes and specialised gadgets
•    It has quick turnaround times and uses an electron beam rather than a photon one.

3.    Focused Ion beam lithography: Modern fabrication technology is focused on miniaturisation. Numerous current product components are getting smaller and smaller. The FIB offers the capacity for direct manufacturing of structures with feature sizes at or below 1 m because to the extremely short wavelength and extremely high energy density. As a result, creating high-quality microdevices or high-precision microstructures with the FIB has recently gained popularity.

In the semiconductor sector, the FIB has proved a potent tool, particularly for mask repair, device modification, failure analysis, and integrated circuit debugging. Ion beam direct write and ion beam projection are the two fundamental working modes created for these applications. The ion beams direct writing procedure, commonly referred to as FIB milling (FIBM), involves directly impinging the ion beam on the substrate to transfer patterns.

It is a sizable collection of microfabrication methods for creating different three-dimensional (3D) microstructures and devices out of a variety of materials by removing materials from a substrate. A collimated beam of ions passes through a stencil mask during the ion beam projection process, and the reduced image of the mask is then projected onto the substrate below. The focused ion beam lithography (FIBL) method of ion beam projection can be utilised as an alternative to traditional optical lithography.

Conclusion

A growing focus on cost-effective advanced technologies is encouraging the use of next-generation lithography techniques and materials to enhance the functionality and manufacturing process of semiconductor chips in several sectors.

Owing to the growing demand for cutting-edge microchips and semiconductors in smartphones and wearable technology, the next-generation lithography materials market is expected to grow at a healthy growth rate.

According to the BIS Research report, the global next-generation lithography materials market is projected to reach $1,005.3 million by 2031 from $85.7 million in 2021, growing at a CAGR of 29.46% during the forecast period 2022-2031.



Find more details on this report in this FREE sample

Interested to know more about the growing technologies in your industry vertical? Get the latest market studies and insights from BIS Research. Connect with us at  hello@bisresearch.com to learn and understand more.